Ideally, a new pair of shoes should be comfortable and fashionable. However, you may find a lot of options in footwear shops that meet these 2 criteria, but at the same time their quality is so bad that they won’t last long. We decided to find out what things you should pay attention to in order to choose a really high-quality pair.
Check the shoes for smudges and glue marks.
Manufacturers often use glue to stick together different parts of the shoe. If the glue is of high quality and the work is done properly, the pair will last a long time. However, small glue drips in the spots where parts meet or traces of glue on the surface indicate that you are looking at low-quality shoes and that there were issues during production.
When a part of the shoe, its sole or insole, comes off a bit, it means the shoemaker probably used bad or expired glue, and this pair will fall apart quickly.
Examine whether the pair is symmetrical.
Quality shoes in a pair should be symmetrical, and any differences between the right and left shoes most likely indicate a defect. To check this, you need to put the soles of both shoes together and see if they match in length and width.
It’s also worth putting the pair on the floor to understand whether the height and outline of the upper edge of the heel are symmetrical. If the soles are painted in different colors, check whether the paint is within the borders of the sole and whether the pattern matches. Gross irregularities in symmetry indicate that the manufacturer didn’t pay much attention to quality.
Check the seams carefully.
Any uneven or diverging seams make shoes look not that good. This happens if the manufacturer used too thin threads or the work was done poorly. As a result, such a pair will fall apart much faster. It’s also necessary to check the uniformity of stitches and the evenness of the seam itself.
If its line is curved or zigzag-looking, this means that the shoes you’re looking at are of poor quality and will lose their appearance in a couple of months. And zigzag-looking stitch is often used to hide the imperfections of the stitching.
Examine the heels.
The heel must be firmly attached to the sole and not wobble. It’s necessary to look at the shoes from the side. In good quality pumps, the high heels are positioned exactly under the center of the heel and touch the ground at a slight incline.
It’s worth looking carefully at the heels from behind – any deviation of the heels from the angle of 90⁰ indicates a defective product. Moreover, these shoes are simply dangerous to wear – this may lead to ankle injuries.
Loose eyelets are a bad sign.
Any metal or plastic parts on the shoe (especially those that come into contact with the skin) should be tightly fastened. Thus, it’s worth carefully examining the eyelets for laces. Although this defect is quite rare, it can lead to wearer’s injury.
You should also check how well any embellishments are attached to the shoe. If they fall off at one point, the pair won’t look good anymore.
Carefully inspect the inside of the shoe.
Some manufacturers save on the training of workers and don’t calibrate equipment before the production of a new product line. As a result, shoes, boots and sneakers may have seemingly insignificant defects such as wrinkles and creases. If these defects are small, they won’t cause much trouble to the wearer. But large creases can rub the skin while walking, which will lead to abrasions and blisters on the feet.
Examine the insoles.
Even if a shoe looks perfect from the outside, you need to scrutinize it from the inside too. If the insoles show small wrinkles and creases, this pair is likely to be uncomfortable to wear. In addition, you should carefully feel the insoles to make sure that there are no bubbles on them.
Another important thing is that there must be cushioning between the insole and the sole, especially in the toe and heel area. Otherwise, a long walk in these shoes will make not only your feet and legs sore, but also your back.
Check how the shoes smell.
Low-quality and cheap shoes often have a strong chemical odor. It’s best to refrain from buying this pair. But if shoes or boots exude the scent of leather, polish or wood, you’ve found the shoes of high quality.
Take a photo of the shoes.
Of course, shoes made of synthetic materials can also be of high quality, especially when it comes to sports models. But good shoes should ideally be made of leather. They are softer and fit better on the foot, which means they will be much more comfortable to wear.
However, the quality of leather also varies. Often, manufacturers don’t mention the type of leather they use to make shoes in order to keep costs down. To determine the quality of the product you are holding in your hands, you need to take a photo of the shoes and enlarge the image. If you can see pores on the leather, you can safely buy the shoes.
Bend the shoe a little bit.
You don’t need to knead your shoes too much, but you can bend the shoe slightly to see how flexible the sole is and whether it remains attached to the upper part when moved. In addition, it’s worth pressing the sides of the shoe a little bit. Throughout the day, our feet usually increase in size a little, so a quality pair should adapt to these changes.
Check how your shoes sound.
Most shoe shops have soft carpeting on the floor, so it’s a good idea to take a short walk on a harder surface before making a purchase. If the soles and heels make unpleasant clanking noises when you walk, you are likely to be wearing a low-quality pair. And platform or wedge shoes shouldn’t sound like there are voids inside the sole.
Examine the material of the sole and heel carefully.
Usually the sole of a really good quality pair is made of leather or good rubber. These shoes are comfortable to wear, and in addition, they almost don’t slip. At the same time, if the base of the sole is uneven, then these shoes will be uncomfortable.
In addition, it’s worth examining the material from which the heels are made. If the manufacturer used plastic or didn’t cover the heel with leather or fabric, then you are looking at a cheap product that is far from being perfect.
Rub the shoes with a cloth.
Sometimes manufacturers use poor quality leather dyes, which can leave marks on the skin or clothes. Therefore, before buying, you should carefully rub the shoes inside and outside, first with a dry cloth and then with a damp cloth. If there are no marks on the fabric, the shoes are okay.
And here’s a list of fashionable shoes that are not as cool as they look.
Florida mom gives birth to rare set of identical twins with Down syndrome
Identical twins are a miracle all by themselves. Births like this happen three or four times in 1000.
Savannah Combs, a first time mother, learned she was carrying twins. She and her husband were overjoyed by the thought of welcoming two babies.
Everything went well with the pregnancy and the couple learned they were expecting girls. However, they also learned that their identical twins both had Down Syndrome. The news came as a shock at first, but Savannah, 23, soon realized that the condition only meant that her girls would be super special. She didn’t mind they would be born with the syndrome. Of course, she was aware that there would be people who wouldn’t accept her bundles of joy, but that didn’t concern her a great deal.
“It’s very rare what they have, but they’ve been my little gems,” the proud mother told News4JAX.
Once the girls were born, Savannah and her husband Justin decided to share their journey on TikTok. The two tiny beauties, Kennadi Rue and Mckenli gained a number of followers on the social media where Savannah posted about each of the milestones they reached.
In one of the videos she shared on TikTok, Savannah revealed how doctors advised her to terminate her pregnancy because the chances of her girls to survive were slim, but she decided to give them a fighting chance. As it turned out, she did the right thing. ”Every [prenatal] appointment they were alive was a blessing to me,” Savannah explained.
They were born five weeks prematurely and had to spend some time at the NICU. Today, they are nine months old and thriving. In fact, they are just like any other baby out there.
“They’re called mono di twins, meaning that they had their own sacs, but they shared the same placenta, meaning that they were going to be identical,” Savannah explained.
“Mo di twins as it is, it’s like very rare. And then you throw Down syndrome on top of it, it’s like one in 2 million.”
“They have feelings. They have a beating heart. They know how to talk. They know how to do things you do. They will get there,” she added. “Like I said, it may be a step behind but they’re going to do it. I’ve learned these kids are feisty little things and happy little things.”
She loves showing the world that having Down Syndrome doesn’t necessarily mean the life of those people is in any way affected negatively.
“I’m going to let them know that they’re just like us and they’re going to get there as long as they put their minds to it.”
Of course, there are always those who post negative comments and judge Savannah for keeping her babies.
”I wouldn’t want those babies; if mine came out like that, they would be straight up for adoption,” one person wrote under one of the videos. However, this mother had just the right answer for the mean person. “I said, good thing they weren’t born to you and were born to me. God knew what he was doing by giving these babies to the right parents who would love them regardless,” Savannah replied.
These girls are truly happy for having a mom like Savannah who wants to raise awareness about Down Syndrome and teach the world that those who have it can lead a happy and fulfilling lives, just like her two beautiful angels.
For more on this family’s beautiful life story go to the video below.
Leave a Reply